VEHICLE INSPECTION PITS UK LIMITED

ABOUT VEHICLE INSPECTION PITS UK LIMITED

mm mild steel plate to exacting standards in our fully equipped fabrication workshop, the walls running the length of the pit have a folded recess just below the top that increases the strength of the pit wall and it also provides space to easily and neatly accommodate air lines, strip lighting and power sockets that you may require either at the time of manufacture or the extras can be retrofitted at a later date if required.

welded on to the outside of the walls which again increases the side wall strength and overall integrity of the inspection pit and steel reinforcing bars are also welded to the outside face of the pit walls in order to firmly fix and anchor the inspection pit in the concrete under the workshop or garage floor.

Each inspection pit also comes with a set of full width folded chequer plate stairs at one end of the pit that are removable so that the space beneath them can be easily utilised for storage and it also comes with a set of ladders at the opposite end. The stairs can also be made in an "L" shape configuration and the stairs can also be fitted at both ends of the inspection pit if required to provide easy access.

specifications and a coat of primer along with two coats of white gloss finish is applied to the internal walls of the pit using the environmentally friendly electrostatic spraying technique. Then a durable and hard wearing black paint is applied to the floor of the pit in order to provide maximum protection and top quality finish that will last many years.